Cutlery and utensil compatibility. These inserts may not fit correctly if used in other manufactures drawers.

When ordering cutlery inserts or utensil inserts for existing drawers please be sure to check whether the drawer that you have in your kitchen is a BLUM drawer. To do this look on the underside of the drawer when it is pulled out. You will probably need a torch for this.

If it is a BLUM drawer there will be a number at the front like the ones shown on the right of the picture shown below. The first number is the model (358M) and the second is the depth of drawer (45002 = 450mm deep or 5002 = 500mm deep) if it looks like the drawing and has the number you are safe.

We stock cutlery and utensil dividers that are made to go into 358M4502S (450 deep) and 358M500S (500 deep)

If you intend to use the pan, provision or bottle dividers you will need to make sure that you have the deep sided drawers. These look like the picture above but with and additional side above it. This will have little holes punched in the sides to take the location pins in the dividers. There should be a high back to the drawer of 185mm inside. There are some drawers on the market that have a back of 120mm inside. If this is the case you will need to change the back to the higher one and add new sides. We can supply both but are not listed on this site. Please call.